Portable Garnet Recycling System in UAE

Garnet Recycling — Portable

Garnet is one of the more expensive abrasives used in blasting work, and on most sites, a large share of it gets swept up as waste after a single pass — even though much of it is still perfectly usable. A Portable Garnet Recycling system is what lets you recover that abrasive on-site and put it straight back into service.

Prism Tech Engineering supplies portable garnet recycling systems built for blasting contractors and industrial sites across the UAE, including active project sites in Dubai and Abu Dhabi where blasting operations need to move location without leaving equipment behind. Our systems are designed to go wherever the job is, without a permanent installation.

Contact us

 

What is a Portable Garnet Recycling System?

A portable garnet recycling system reclaims spent abrasive from a blast site and separates it into reusable garnet, undersized fines, and waste material. Used abrasive is collected and fed into the unit, where it passes through screening and air-wash classification stages. Heavier, still-usable garnet particles are separated out and sent back into the feed hopper for reuse, while dust, broken particles, and debris such as paint chips or coating residue are removed and directed to waste.

Because the whole unit is built on a mobile chassis or skid, it can be moved between sites or repositioned within a blast room without needing to be dismantled — which is exactly why it’s the preferred choice for contractors working across multiple UAE project locations.

Why Choose Our Portable Garnet Recycling Systems

  • Genuinely mobile – Transportable by truck or trailer and quick to set up at a new site, with no fixed foundation required.
  • Efficient abrasive recovery – Screening and air-wash separation reclaim a high proportion of usable garnet from each blasting pass, cutting down on fresh abrasive purchases.
  • Integrated dust control – Fines and dust generated during recycling are captured through cartridge filtration rather than released into the site air.
  • Low power draw – Designed to run efficiently on standard site power connections without heavy electrical infrastructure.
  • Durable build – Constructed to handle continuous outdoor use across the UAE’s heat and dust without frequent breakdowns.
  • Site-flexible configuration – Hopper size, screening mesh, and throughput capacity can be tailored to your typical project scale.

Applications

Our portable garnet recycling systems are widely used in:

  • Open-site blasting projects such as pipelines, tanks, and structural steel
  • Shipyard and marine blasting operations
  • Oil & gas facility maintenance and turnaround projects
  • Blast rooms requiring a mobile recovery unit rather than a fixed recovery floor
  • Any project where blasting moves between multiple locations over its duration

How the Recycling Process Works

Collection – Spent abrasive is manually swept or vacuumed and fed into the unit’s intake hopper.

Screening – A vibratory or rotary screen removes oversized debris such as coating flakes, welding rods, and larger contaminants.

Air-Wash Classification – An air stream separates the material by weight, drawing out dust and lightweight fines while letting reusable garnet fall through for reuse.

Reuse – Cleaned, correctly sized garnet is discharged into a ready-to-use hopper, so blasting can continue with minimal downtime between passes.

Prism Tech Engineering – Portable Garnet Recycling Supplier in Dubai, Abu Dhabi & Across the UAE

Prism Tech Engineering Service & Trading LLC designs abrasive recovery equipment as part of our broader Blast Room and blasting & painting services offering, so our portable garnet recycling systems are built with a real understanding of how blasting projects actually run in the UAE — including the moves between sites that fixed recovery systems can’t handle.

With local manufacturing and a UAE-based team, we support clients across Dubai, Abu Dhabi, and the wider Emirates with delivery, setup, and ongoing service wherever the project takes them.

Get in touch with our engineering team

FAQ

How much garnet can a portable recycling system recover?

Recovery rate depends on the condition of the spent abrasive and how many times it’s already been used, since garnet breaks down gradually with each pass. Our team can advise on expected recovery rates based on your abrasive type and blasting application.

Can the system handle abrasives other than garnet?

Yes, most portable recycling units can process other dry abrasive media as well, though the exact configuration may need adjusting depending on the material’s density and particle size.

Is a foundation or civil work required to install the unit?

No. Portable garnet recycling systems are designed to work directly off a truck, trailer, or skid base, so they can be set up quickly on-site without foundation work.

Can this be used inside a blast room as well as on open sites?

Yes. While it’s built for site mobility, a portable garnet recycling unit can also be used inside a blast room as a flexible alternative to a fixed recovery floor system.

How is dust managed during the recycling process?

The system includes cartridge filtration that captures dust and fine particulates generated during screening and air-wash separation, rather than releasing it into the surrounding air.

Do you provide setup and support across Dubai and Abu Dhabi?

Yes. Our team handles delivery and commissioning, and provides after-sales and spares support for clients across Dubai, Abu Dhabi, and the rest of the UAE.

Why choose Prism Tech Engineering for portable garnet recycling in the UAE?

We build abrasive recovery equipment alongside our Blast Rooms and blasting services, so our portable garnet recyclers are engineered by a team that understands real project conditions — not just a standalone piece of equipment sold on its own.